Rutgers University
  • RiverSonde was not Transmitting

    Posted on June 17th, 2010 admin No comments

    I spoke with Hector at Codar yesterday and we got the RiverSonde working.  I had turned off the transmitter when we were setting up the system because it is not good to transmit while the antenna is not connected to the amplifier.  This is what the spectra should look like.

    I learned yesterday that positive currents are to the right when behind the antenna.  The antenna that transmits the signal is antenna 2.  while behind the antenna, from left to right it is antenna 1, 2 then 3.

    Here are the correct setting for Receiver controller.  This application transmits the radio signal.

    This is a simplified version of SeaSonde Controller.

  • THINGS TO DO FOR THE SUMMER

    Posted on June 16th, 2010 admin 1 comment

    1. Install River Sonde

    2. Verify if River Sonde is running properly

    3. Determine if Riversonde can detect small vessels

    4. Try to make river sonde work on top of the buiding HOWE.

    5. try riversonde on the beach

    6.coordinate an exercise with other teams.

  • SECTIONS FOR PAPER

    Posted on June 16th, 2010 admin No comments

    SECTION PEOPLE

    1. ABSTARCT – EVERYONE
    2. INTRODUCTION – ANGELICA
    3. BACKGROUND – LENNY
    4. HYPOTHESIS – DANIELLE
    5. METHODOLOGY – OMAR
    6. RESULTS – SHANKAR
    7. DISCUSSION – DAKOTA

  • RiverSonde Config Parameters

    Posted on June 14th, 2010 admin No comments

    Here are screen captures of the setup we did on friday June 11, 2010.